Heavy-duty structural integrity built with premium Q235B and Q355B cold-rolled steel, strictly compliant with European racking specifications and custom-sized for standard EUR 1 (800 × 1200 mm) configurations.
Taulov and Kolding serve as Denmark's epicenter for multi-tenant logistics. Our wide-span selective pallet racks and double-deep systems are engineered to house varying Euro-pallet heights up to 13.5 meters clear span, allowing high-turnover cross-docking operations with instant, direct SKU addressability.
Supporting biomedical exporters and refrigerated food chains around Hovedstaden, our automated radio shuttle and drive-in racks operate down to -28°C. Fully galvanized uprights and cryogenic steel formulations prevent structural micro-fracturing and zinc-peeling under thermal condensation cycles.
Heavy maritime and offshore wind engineering sectors around Esbjerg port require cantilever racks and customized vertical sheet-metal drawer systems. These carry heavy mechanical castings, long pipe bundles, and steel plates with localized load capacities exceeding 3,000 kg per arm.
| Structural Parameter | Guangzhou Factory Racking (Denmark Spec) | Standard Commercial Grade (Generic) | Danish Regulatory Reference |
|---|---|---|---|
| Primary Steel Grade | Certified Q235B / Q355B (Equiv. S235JR / S355JR) | Recycled commercial mild scrap steel | EN 10025-2 Yield Stress Verification |
| Deflection Limit Ratio | 1/200 to 1/250 max under full dynamic SWL | 1/150 or non-certified deflection | EN 15512 Racking Design Protocol |
| Beam Locking Mechanism | Spring safety pins with 5-tooth riveted connector | Single-bolt or generic slip friction catch | Arbejdstilsynet (Danish WEA Safety) |
| Surface Protection | Pickling + phosphating + 70μm epoxy-polyester | Single-pass air dry paint (under 30μm) | ISO 12944 Corrosivity Class C2/C3 |
| Pallet Interface Geometry | Dedicated 800×1200 mm EUR 1 & EUR 2 dimensions | Generic imperial 40×48 inch racking conversion | INSTA / European Standard Pallet Spec |
Operating from a continuous 30,000 m² state-of-the-art production complex, our automated roll-forming lines process raw hot-rolled coils from Tier-1 mills into complex multi-bend omega (Ω) upright profiles. The structural geometry incorporates 11–13 cold deformation bends, imparting exceptional buckling resistance along both the major and minor axes.
Uprights undergo automated CNC punch pressing to ensure pitch uniformity within ±0.1 mm over continuous 12-meter lengths. Every welded connector plate utilizes multi-head robotic MIG welding cells, eliminating cold lap or porosity defects, followed by a rigorous 10-stage pre-treatment wash including chemical pickling and iron phosphating to ensure chemical bonding of the thermoset electrostatic powder coat.
With Danish logistics hourly wages standing among the highest globally, operators are replacing conventional counterbalance forklift operations with semi-automated radio shuttle carts and automated storage and retrieval systems (AS/RS). Our high-precision racking tracks achieve millimetric accuracy over 80-meter runs.
Danish corporate sustainability mandates (ESG reporting) require verified Environmental Product Declarations (EPD). We implement low-emission electric induction curing ovens, heavy-metal-free thermoset resins (fully compliant with EU RoHS and REACH), and highly optimized nesting for sea container shipping.
Fast-delivery expectations around Copenhagen and Aarhus have spurred multi-tier rack-supported mezzanine floors. By doubling and tripling floor capacity without extending the building envelope, companies unlock massive vertical volume under strict municipal height codes.
We hold valid CE Certification (Certificate No. 2435-CPR-8605159), ISO 9001:2015 Quality Management certification, and strict RoHS material clearances, guaranteeing compliance with Danish Arbejdstilsynet regulations.
With an expansive 30,000 m² workshop, 300+ technicians, and 30,000 tons of monthly capacity, we design and produce custom cross-sections, unique colorways (RAL-matching), and tailor-made rack components for European brands.
Our structural design department delivers zero-cost 2D CAD layouts, 3D photorealistic renderings, and complete structural calculations based on specific building footprints, clear heights, and forklift turn radii.
All our European-bound selective, shuttle, and drive-in racks are engineered around standard 800 × 1200 mm (EUR 1) and 1200 × 1000 mm (EUR 2 / Industrial) pallet footprints. Standard beam lengths are fabricated at 1825 mm (2-pallet bay) and 2700 mm (3-pallet bay) with clearance margins following EN 15620 guidelines to ensure rapid forklift operations without timber overhang or bottom-board snagging.
Every commercial delivery includes an exhaustive engineering dossier: material test certificates (MTC) proving steel tensile yield ratings, structural load calculation reports verified according to EN 15512, dynamic beam deflection data, certified installation assembly schematics, and load plaque warnings conforming to DS/EN 15635 for inspection compliance.
Cargo departs via direct international deep-sea lines from Guangzhou or Nansha port to the Port of Aarhus or Copenhagen (Malmö hub) via feeder from major European hubs (Hamburg or Rotterdam). Typical maritime transit times range from 32 to 40 days. We provide comprehensive export documentation (Bill of Lading, Commercial Invoice, Packing List, EUR.1 / REX origin documentation) supporting seamless Danish SKAT customs entry under standard customs tariff headings (HS 7308.90).
For installations situated in coastal marine atmospheres or sub-zero food handling depots, we apply specialized pre-treatment baths featuring acid pickling, ultrasonic degreasing, and dense zinc phosphating. This is sealed with automated thermoset powder coating at a thickness of 70–90 μm. For unheated outdoor storage or extreme coastal dampness, hot-dip galvanized finishes certified to EN ISO 1461 are provided.
Yes. Our automated CNC punching line allows infinite customization of column cross-sections and beam profiles. For VNA operations, we manufacture ultra-straight upright lengths exceeding 12 meters with structural tolerances strictly aligned with EN 15620 Class 300, complete with floor-mounted guidance rails and column base protection boots.
Send us your warehouse CAD drawing, clear ceiling height, pallet specifications, and forklift model. Our engineering division will supply an EN 15512 compliant storage concept, complete load calculations, and a direct wholesale factory quotation within 24 hours.
Get Catalog