Guangzhou Heda Shelves Co., Ltd. places structural integrity and operator safety at the center of every system we engineer. For EPC contractors, 3PL supply chain hubs, cold store operators, and factory owners across Southeast Asia, compliance certificates are not mere paperwork—they are an assurance that every upright frame, beam connector, and mezzanine platform is calculated to withstand static and dynamic warehouse forces.
All raw cold-rolled steel coils, automatic punch patterns, robotic welding joints, and electrostatic powder coatings undergo rigorous laboratory and on-site testing. We ensure complete structural compliance with European EN standards and international safety guidelines.
CE Mark Certified No. 2435-CPR-8605159 
ISO 9001:2015 No. 18624Q00169R0M 
RoHS Tested Lead & Toxin Free Our verifiable documentation protects corporate clients during municipal authority inspections, fire department audits, and insurance policy approvals throughout Malaysia, Thailand, Vietnam, Indonesia, Singapore, and the Philippines.
CE Safety Certificate 
ISO 9001:2015 QMS 
RoHS Environmental 
Load Test Certificate Direct audits ensure our manufacturing facilities consistently exceed international engineering tolerances, load-bearing capacities, and anti-corrosive performance.
Certified under European Union Construction Products Regulation (CPR). Guarantees that cold-formed structural steel members meet strict yield strength, deflection, and deflection limits.
Covers end-to-end design, robotic roll-forming, continuous punching, welding, and surface finishing protocols for reliable batch-to-batch consistency and trace accountability.
Verifies continuous factory production control (FPC). Includes steel composition traceability, weld penetration ultrasonic testing, and automated hole-pitch calibration.
Verifies that epoxy-polyester coatings are 100% free from hazardous heavy metals like lead, mercury, cadmium, and hexavalent chromium, making them safe for food distribution and pharma hubs.
Every production run undergoes systematic quality checks before components are packed into containers for ASEAN export.
| Inspection Stage | Audit Parameter | Standard Applied | Quality Verification |
|---|---|---|---|
| Raw Steel Verification | Tensile strength, chemical composition, thickness gauge | Q235B / Q355B Hot-Rolled & Cold-Rolled Strip | Mill Test Certificate (MTC) |
| Roll-Forming & Punching | 50mm/75mm hole pitch accuracy, upright verticality | Tolerance within ±0.5mm across 12-meter lengths | Automated Laser Gauge |
| Welding Integrity | Beam connector welds, base-plate reinforcement joints | Continuous CO₂ gas shielded automatic robotic welding | Defect-Free Penetration |
| Surface Preparation | Degreasing, derusting, pickling, and phosphating | Multi-tank immersion cleaning for tropical adhesion | Salt Spray 500+ Hours |
| Powder Coating | Film thickness (60-80μm), cross-hatch adhesion, impact test | Electrostatic cure at 180°C - 200°C | RoHS Non-Toxic Verified |
| Final Load Testing | Beam deflection ratio (1/200 standard), seismic floor anchor shear | EN 15512 Safety Factors applied | CE Structural Approved |
We supply high-resolution certificate PDFs, mill test reports, and third-party laboratory test data for government and private tenders across ASEAN.